ADT® Authorized Dealer Serving Evansville & Surrounding Areas
ADT smoke detector in a Evansville family room
May 24, 2021

Monitored Fire Alarms Vs Smoke Detectors In Evansville

The National Fire Protection Agency advises you place a smoke detector.  At the very least, your home should have a smoke detector in every bedroom, the hallways outside sleeping quarters, and on each story of the structure (don’t forget the basement). But, should you just buy an ordinary smoke detector, or is it better for you to you opt for a more cutting-edge monitored fire alarm? Looking at the Evansville monitored fire alarm vs smoke detector debate, you quickly discover why one is a clear winner over the other.

Standard Smoke Detectors Only Sense Smoke

Like the name says, standard smoke detectors only go off when they detect an excess of smoke. Then they sound off -- usually with a loud chirping -- until you re-arm the alarm. However, there's no promise that anyone will hear the sound if you’re [[away|absent|not home].

Ideally, you need to buy robust smoke detectors that are designed for both smoke from both blazing and smoldering fires. It might be best to interconnect your detectors so every alarm goes off at the same time. This way, you will know if there's a fire from upstairs, even if it occurs from a mishap in the basement.

Monitored Fire Alarms Alert You To Fire And Smoke When You Are Home Or Out And About

A monitored fire alarm looks and mounts in a similar way as your common smoke detector. If they detect fire conditions anywhere in the house, they'll sound a incredibly loud tone. But, there's a myriad of things that your monitored fire alarms will provide that your smoke detectors cannot.

First, high-tech sensors will look for increasing heat as well as smoke. When they find fire, they'll notify your monitoring team as well as trigger the piercing alarm. That allows you to focus on escaping out of the house as your monitoring specialist calls the fire department. And because your monitoring center is on alert 24/7, your alarms never fail to notify help no matter where you are.

Monitored fire alarms commonly pair into your Evansville home security system. Other tools synced to the same system can be programmed to activate when your fire alarms trigger. For instance, your smart thermostat can automatically activate the vent fan, which should help prevent further spread. Or have your whole house jump into action when the lights come on, your locks open, and your security system deactivate. You can also have your system send your phone a message to know that your home's in peril while you're out and about.

ADT monitored heat detector in Evansville 

The Verdict Of Monitored Fire Alarms Vs. Smoke Detectors in Evansville

It's obvious to determine what wins in a fair battle between monitored fire alarms and smoke detectors. You just have so many more tools with a monitored fire alarm.

Run-of-the-Mill Smoke Detectors:

● Sounds high-decibel bell when the device finds excessive amounts of smoke

Monitored Fire Alarms

● Triggers high-decibel siren when the component detects excessive amounts of smoke

● PLUS can detect high heat

● PLUS links with your home security system

● PLUS notifies a 24/7 monitoring professionals which will send emergency professionals

● PLUS sends you a emergency alert to your mobile device

Get Monitored Fire Alarms For Your Evansville Home Security System

To obtain the most from your monitored fire alarms, use a powerful security system, like ADT. Luckily, Secure24 Alarm Systems can customize your ADT home security bundle to contain fire and safety alarms. Just call (812) 200-5693 or send in the form below to start.