Categories

False alarms and system glitches can be exasperating, and more importantly, might prevent your security system from working the way it should. Luckily, most issues, from dead batteries to false alarms, are easy to correct. Explore our tips for troubleshooting your home alarm system in Evansville. We’ll help keep your family members shielded and your system operating smoothly.

Test Your Home Security System In Evansville

One of the best ways to troubleshoot your property’s defense is to test it yourself! Modern systems allow you to place them in test mode to keep you from triggering an emergency response. Once in test mode, take these steps:

• Activate your system as you would when you leave.
• Open a window or door that has a contact sensor, or test other sensors. Shut the window or door once you’re done so it doesn’t trigger the alarm as you turn the system back on.
• Permit the alarm to go off for 60 seconds to make sure a transmission is dispatched to the security provider and an entry is created in the alarm system log.
• Proceed to test devices as you wish
• Review the alarm’s activity log to confirm proper function.

Don’t worry, monitoring professionals will be aware that your alarm system is undergoing a test. Just make sure to switch out of test mode when done. It’s smart to test every other month or anytime you make changes to your home’s phone or internet provider.

Check The Placement And Condition Of Motion Sensors

Although an integral part of your alarm system, motion detectors are well known for false alarms. You can help prevent them with some basic troubleshooting.

• Perform a physical inspection. Is there something that could shift within the detection path of the sensor, like a curtain taken by a breeze?
• Is the sensor clean? Cobwebs, dirt, and grime can cause issues. Ensure the face is clean.
• Does the motion detector have pet immunity you can turn on? Some can be configured to disregard pets weighing as much as 100 pounds.
• When was the battery last replaced? Low batteries may impact performance or cause false alarms.
• Is a heat source impacting the sensor? Excess heat from sunlight or a fireplace can set off an alarm.

Keep Batteries Ready And Look Out For Low Battery Notifications

One of the great advantages of new home security systems is that they’ll let you know when batteries are getting low. If your system is equipped with a control panel or app, you’ll often find messages there. Depending on your system, you could notice an occasional beep when batteries are low. 

Motion detectors, smoke detectors, contact sensors, and other wireless components have batteries that will have to be replaced every year or two. It’s a good idea to keep batteries ready and set a replacement schedule. Top systems also have a rechargeable backup battery for the main control panel. This battery helps keep your system operating if you lose power and should charge back up once power is back online. If it fails to recharge, you will have to replace it.

Troubleshooting Is Effortless With ADT Home Security In Evansville 

As the leading name in home security, ADT creates systems that supply unrivaled functionality and convenience. Accessing test mode is simple through MyADT.com or the ADT+ app, and you’ll always be sent alerts when a sensor battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system ideal for your Evansville home. Place a call to (812) 200-5693 or complete our form today!